Trix HO
2002 From Ore to Steel
Home
T22107 Small Diesel Locomotive
Prototype: German Federal Railroad class Köf II, B design,
built starting in 1934.
Use: Switching work, industrial locomotive.
Model: Era IV, diecast metal frame and body, 5-pole high-efficiency
motor with skewed armature and flywheel, separately applied details, maintenance-free
LED’s at both ends as headlights. Comes from the factory with a dual language
DCC/Selectrix decoder, can also be used in analog operation. 2 axles powered,
NEM coupler pockets. Length over buffers 74 mm / 2-15/16”.
T23999 “Coke Transport” Car Set
Prototype: 4 German Federal Railroad type Okmm 58 for transporting
tub containers, each loaded with two tub containers.
Model: Era III, diecast metal frame, with removable containers
with moving parts, close coupler mechanism. Total set length 370 mm / 14-9/16".
T24003 “Ore Transport” Car Set
Prototype: 4 ore transport cars painted and lettered for the
firm “Railroad and Harbors”, Duisburg, Germany.
Model: Era IV-V, loaded with real ore, close coupler mechanism
and NEM coupler pockets.
Total set length 515 mm / 20-1/4”.
T24005 Freight Car Set
Prototype: 2 type SSym 46 warm slab cars, used on the German
Federal Railroad.
Model: Era III, loaded with thermal covers. Cars have different
car numbers. Close coupler mechanism and NEM coupler pockets. Total set
length 306 mm / 12-1/16”.
T24006 Stake Car
Prototype: German Federal Railroad type Rlmms 58.
Model: Era III, loaded with steel bar stock, removable stakes,
close coupler mechanism, NEM coupler pockets.
Length over buffers 157 mm / 6-3/16”.
T24007 Freight Car Set
Based on the following German Federal Railroad prototypes: 1
Type Om 12 with brakeman’s cab, 1 Type Omm 37 with truss rods, 1 Type Omm
52, 1 Type Omm 55 with truss rods.
Model: Era III, cars loaded with scrap and weathered, close
coupler mechanism, NEM coupler pockets. Length over buffers 462 mm / 18-3/16”.
T24008 Float Pipe Car Set
Prototype: 4 cars lettered for the “Work Group for Amphibious Traffic”,
each loaded with a float pipe container.
Model: Era III, float pipe container halves can be tipped to the side.
They are locked together in the assembled mode. The containers are removable
and as models can also float. Built-in weights allow the containers to
float at the appropriate depth, when they are empty. Imitation freight
loads are included whose weight will bring the model of the float pipe
down to the water line of a loaded prototype unit. Comes with removable
container with movable parts, close coupler mechanisms. Total set length
710 mm / 27-15/16".
T24016 Freight Car Set
Based on prototypes from the steel industry: 2 Slag ladle
cars, 2 Crude iron ladle cars.
Model: Era III, cars come with new, different car numbers, weathered
paint scheme, with close coupler mechanism, with NEM coupler pockets. Total
set length 425 mm / 16-3/4”.
T66105 Gantry Crane
Model of a gantry crane. Full working features with digital control.
The controller for the crane is included. Can be connected to the accessory
output on a model railroad transformer. 14 volts AC. The base plate for
the crane fits into the track spacing system for the Märklin C Track
and for many DC systems with a clearance of 232.5 mm / 9-1/8" between the
running rails for the crane bridge and a length of 360 mm / 14-3/16”. The
base plate can be lengthened. The crane bridge is driven by two powerful
motors. The crane cab on the bridge is driven by a spindle drive and a
powerful motor. The crane cab can be turned 360°. The crane hook can
be raised and lowered. The crane hook is made of diecast metal. The electromagnet
included with the crane can be connected to it. Working spotlight. All
of the crane’s functions can be controlled individually in digital operation.
Base is approximately 360 x 360 mm / 14'3/16" x 14-3/16". Height is approximately
270 mm / 10-5/8".
T66106 Building Kit for a Top Blown Steel Converter
Kit for the building complex of a top blown steel converter. Two converter
containers, two overhead traveling cranes, work platform, safety doors,
crude iron ladles, slag ladles and scrap iron charging boxes. The base
is ready for the installation of two through tracks and is suitable for
Märklin C Track or Code 83 and 100 2-rail track. The hall and the
converter containers can illuminated with the T66111 accessory kit. The
accessory kit must be installed at the same time as the assembly of the
building kit. A challenging kit, required time to build is about 40-50
hours. Detailed multi-language instructions included. Area approximately
630 x 400 mm / 24-13/16" x 15-3/4". Height approximately 400 mm / 15-3/4".
T66107 Building Kit for an Inland Waterway Ship
Kit for the model of a typical 67 meter / 219 foot inland waterway
ship for the Rhine. Detailed reproduction of the hull, the hold, wheel
house, cabins and many other details. The ship can be built to a length
of 770 mm / 30-5/16” or 400 mm / 15-3/4”. The hull can be represented as
a full hull model or as a water line model. A challenging kit, required
time to build is about 30-50 hours. Detailed multi-language instructions
included. Decals included for the names and flags "Marina" (D), "Mireille"
(F), "Heidi" (CH), "Anton" (A), "Frans-Peter" (NL).
Length 770 mm / 30-5/16” or 400 mm / 15-3/4”.
T66108 Building Kit for the Workshop Halls of a Foundry and
Rolling Mill
Kit for the model of a typical building for a steel foundry or a rolling
mill. The model of the building can be lengthened and widened with additional
kits as desired. Cut-out lines are present on the back of the foundry walls
so that doors and drive-throughs can be represented according to your own
plans. Different roof air vents included in the kit. A challenging kit,
required time to build is about 10-20 hours. Detailed multi-language instructions
included. Area 405 x 255 mm / 15-15/16" x 10'1/16". Height 250 mm / 9-13/16".
T66109 Building Kit for Grain Storage Silos
Kit for the model of a silo complex for grain at inland harbors or
in many railroad yards. Many details. A challenging kit, required time
to build it is about 20-30 hours. Detailed multi-language instructions
included. Area 460 x 250 mm / 18-1/8" x 9-13/16". Height 350 mm / 13-3/14".
T66111 Accessory Kit
This kit can be used to equip the T66106 top blown steel converter
with ceiling lighting, blinking warning lights and an imitation of glowing,
molten steel in the two converters. The light bulbs and LEDs are already
equipped with wires of the necessary length and are connected to a distribution
circuit board. The latter only needs to be connected to the accessory terminals
on a model railroad transformer. This kit must be installed when the T66106
is being built; it is not designed for installation after the kit has been
built. Detailed multi-language instructions included in the T66106 building
kit for the top blown steel converter.
T66116 Building Kit for Cooling Towers
Kit for the model of two cooling towers with steel latticework construction.
Many details such as the water lift pipe, water distributor pipes, catwalk
galleries and water runoff. A challenging kit, required time to build is
about 5-10 hours. Detailed multi-language instructions included. Area 220
x 220 mm / 8-11/16" x 8-11/16". Height 290 mm / 11-7/16".
Return to Trix page